BFT Automation

ELI RELEASE LEVER

L shaped manual release lever.

END BLOCK (POST END) & MANUAL RELEASE FOR PHOBOS AC

Post end block and manual release for Phobos AC A motors.

ERIS A30 WIRELESS PHOTOCELL

Pair of Eris 180° wireless photocells.  Power supply  3.6V Type C lithium battery. Capacity 7.5Ah  Supply voltage  24 V~/=  Current demand   Standby...

EXPANSION CARD EBD

Inputs and outputs expansion card for Thalia BT A card. Includes two command inputs and four non-programmable security inputs.

FCS BOLTS

FCS BOX BRONZE BUSH

FCS box bronze bush

FCS SPLINE LOWER COLLAR (SUB MOTORS)

FCS top collar for 230V SUB motors.

FCS TOP COLLAR (230V SUB MOTORS)

FCS top collar for 230V SUB motors.

FIXING KIT FOR MICHELANGELO BOOMS

FIXING KIT- FOR GIOTTO BOOM

Fixing kit for rectangular booms and round booms.

FL130B PHOTOCELL

Pair of FL130B Hardwired Photocells.  Power supply  20 to 31Vac / 22÷30Vdc  Absorption per pair  70mA;  Range  30m  Relay contacts  1A at...

FL130B PHOTOCELL PROTECTIVE COVERS

Pair of protective covers for the FL130B photocells.

FLUSH HOLDER FOR MURA PHOTOCELL

Flush holder for Mura photocell. Recessed container CCI Mura, for wall or concrete pillar installation.

FORKED GATE BRACKET FOR P-SERIES MOTORS

Gate bracket for P-SERIES motors.

FOUNDATION BASE (GIOTTO/MICHELANGELO BARRIER)

Foundation plate for Giotto and MCL barriers.

FOUNDATION BASE FIXING KIT FOR GIOTTO/ MICHELANGELO BARRIER

Fixing kit required MCL barrier base.

FOUNDATION KIT FOR MAXIMA ULTRA 36

Foundation Kit for Maxima Ultra 36 Only

GAS CLOSER GATE/FRONT BRACKET (GC10)

GC10 - Gas closer bracket for gate/ front bracket. 

GAS CLOSER POST/ REAR BRACKET (GP10)

GC10 - Gas closer bracket for post/ rear bracket.

GAS STRUT ADJUSTER KEY

Gas strut adjuster key.

GAS STRUT CLOSER FOR PEDESTRIAN GATES

Gas strut closer for pedestrian gates

GATE BRACKET

Gate Bracket for LUX, LUX 2B BT. GIUNO A20, ORO, KUSTOS and LUX FC 2B motors.

GATE BRACKET FITTING KIT FOR LONG STROKE

Gate Bracket fitting kit for LUX G BT and GIUNO BT A50 motors.

GATE BRACKET FITTING KIT SHORT STROKE

Gate bracket fitting kit for LUX 2 BT and GIUNO BT A20 motors.

GATE BRACKET FOR LONG STROKE MOTORS

Gate bracket for long stroke LUX motors and GIUNO BT A50.

GIOTTO 30/50/60 MOTOR AND GEARBOX

Motor & Gearbox for GIOTTO 30/50/60 BT A U Barriers

GIOTTO BT B ULTRA 36

The Giotto BT B Ultra 36 is our entry-level barrier for intensive usage, it is suitable for clear drive through gaps of up to 6m. It is fitted with a 24v DC motor and comes with an extensive range...

GIUNO BT A20 BLACK PLASTIC END CLAMP BRACKET

Nylon end clamp for LUX 2B BT 24v Hydraulic motors.

GIUNO ULTRA - SINGLE KIT

24v hydraulic swing gate operator The Giuno Ultra is a 24v hydraulic swing gate operator built for intensive use. There are two models available, the A20 and A50. The A20 model is suitable leafs up...

GIUNO ULTRA - TWIN KIT

24v hydraulic swing gate operators The Giuno Ultra is a 24v hydraulic swing gate operator built for intensive use. There are two models available, the A20 and A50. The A20 model is suitable leafs up...

GIUNO ULTRA BT A PLASTIC KIT

Plastic finishing kit for GIUNO BT A motors.

GIUNO ULTRA BT A20 LIMIT KIT

Limit switch kit for GIUNO BT A20 Hydraulic motors.

GIUNO ULTRA BT A50 LIMIT KIT

Limit switch kit for GIUNO BT A50 hydraulic motors.

GIUNO ULTRA Swing Gate Operator

GIUNO ULTRA BT A Hydraulic Swing Gate Operator The Giuno Ultra is a 24v hydraulic swing gate operator built for intensive use. This hydraulic gate opener is suited to industrial and residential use...

GU36 HEAVY SPRING FOR BOOM LENGTH MORE THAN 4M

GIOTTO ULTRA 36 heavy spring form boom length greater than 4m

GU36 SPRING FOR BOOM LENGTH UPTO 4M

GIOTTO ULTRA 36 light spring for boom below 4m.

HAMAL

The Hamal SL1 is a control panel for 24v sliding gate operators. The control panel is in-built to the Deimos BT A400. Features: Control panel with trimmer and dip switch for one operator, 230V -...

HEX BOLT & SCREW FOR CURVED ROTATION LEVER

HOUSING BRACKET FOR LZR I100, I110 & H100 SENSORS

LZR I100 & I110 and H100 housing bracket

ICARO AC A 2000 RELEASE PIN KIT

Pin release kit for ICARO AC A 2000 sliding gate motors.

ICARO AC A2000 SMART / ULTRA COVER KIT

ICARO SMART/ULTRA cover kit.

ICARO ENCODER KIT

Encoder kit for ICARO sliding gate motors.

ICARO OPERATOR KITS

September Offer: Get an additional BFT Compacta photocell FREE with every sliding gate motor kit! 230v Automatic Sliding Gate Operator Kits The Icaro range holds two 230v automatic sliding gate...

ICARO SLIDING GATE OPERATORS

230v Automatic Sliding Gate Operator The Icaro range holds two 230v automatic sliding gate operators. The Icaro Smart AC A and the Icaro Ultra AC A is suitable for gates weighing up to 2000kg. The...

ICARO ULTRA AC / ARES ULTRA MANUAL RELEASE KIT

Manual release handle for ICARO ULTRA sliding gate motors.

ICARO VELOCE - FAST SLIDING GATE OPERATOR

230v Fast Automatic Sliding Gate Operators The Icaro Veloce range holds two 230v automatic fast sliding gate operators. The Icaro Veloce AC A1000 is suited to gates weighing up to 1000kg with a leaf...